3 Installing and charging batteries
3.1
Installing
The Everec ME1 requires 4 Mignon AA NiMH batteries. Depending on the battery capacity and
the ambient temperature, you can record for about 4 hours or reach 10 hours standby time.
Figure 3: Changing batteries
To insert batteries, open the battery compartment cover at the base of the recorder by sliding it
toward the side with the monitor. The battery holder can be removed by shaking lightly. Insert 4
batteries, and check for correct polarity.
The symbol in the battery compartment of the Everec ME1 shows the correct direction to insert
the battery holder to ensure correct polarity. Insert the holder into the compartment, and close
the cover.
Note:
Remove batteries from the recorder as soon as they are empty.
Remove batteries from the recorder if it is not used for long periods to avoid damage caused by
leakage.
Note:
Do not dispose of batteries as household waste. Every user is obliged by law to return used
batteries . They may only be disposed of by an expert retailer or at battery collection sites (com-
munity collection sites or hazardous material mobile facilities).
© July 2008
Page 7/33
Instruction Manual
