8.
Rear Wheels:
Loosen set collar on axle. Slide one washer onto each rear axle against set
collar. Slide wheel onto axle along with washer and another set collar. Secure cotter pin
into end of axle. Slide outside set collar against cotter pin and tighten. Move remaining
components against outside set collar and tighten inside set collar.
Inner set collar and washer
Outer washer, set collar and cotter pin
9.
Seat:
Place seat on back rest with the wide flap at top. Install flaps around outside frame
and buckle from top to bottom and side to side. Sit in seat and readjust tension until
comfortable.
Seat buckle installation
10.
Final Check:
Install the handle grips to the handlebars and put the safety flags into the
holders. A bit of water inside the handle grips may make it easier to install them. Check
all connecting bolts and screws for tightness. Pump tires to the proper pressure.
