TrailMaster MID XRX Assembly Manual Download Page 11 | Manualshive

Page: 11 / 25

TrailMaster MID XRX Assembly Manual Download Page 11

55

At this time, lift the rear of the go-kart
with the help of an assistant. Place the

kart on a jackstand. Be safe. Use caution.

56

Place the battery pad into battery tray
located behind the passenger’s seat.

57

Install the battery in the cart with the ter-

minals to the rear. First, install the positive

cable  (red)  to  the  ‘+”  on  the  battery.  Next,  install
the  negative  cable  (black  or  green)  to  the  ’-’  on
the battery. NOTE: Use pliers to hold the nut while
using  a  Phillips  head  screwdriver  to  tighten  the
screw.

58

Place gray plastic cover over battery.

59

Place rubber battery strap over bat-
tery hook to the front of the battery

tray first. Then, pull the strap over the battery
and place it on the rear hook of the battery
tray. If necessary, use pliers.

60

Locate the brake caliper on the rear
axle. Tighten the 2 mounting bolts

securely with a 6mm Allen wrench.

GOKARTMASTERS.COM

GOKARTMASTERS.COM

GOKARTMASTERS.COM

GOKARTMASTERS.COM

GOKARTMASTERS.COM

GOKARTMASTERS.COM

«
...
9
10
11
12
13
...
»

Summary of Contents for MID XRX


























Reviews:

No comments