www.TrailFX.com
Page
4
of
5
Rev 020218
2.
Attach the license plate to the Replacement Bumper
(Fig 7)
. Fasten the license plate with the hardware.
3.
Fasten the provided Tow Hooks to thg Bumper with the hardware
(Fig 8)
.
4.
Attach the Bumper to the frame. Fasten the Bumper with the hardware
(Fig 9A & 9B)
.
5.
Reinstall the factory wiring harness to the fog light.
6.
Level and adjust the bumper, make sure that all hardware is secure and tight.
7.
Installation is finished, pick up all tools.
Fig
7
(4)5mm Lock Washers
(4)5×15×1.2mm Flat Washers
(4)5mm Hex Nuts
(4)5×15×1.2mm Flat Washers
(4)5×20 Phillips Screws
Fig
8
(2)12×60mm Hex Bolts
(4)12×24×2.5mm Flat Washer
(2)12mm Lock Washer
(2)12mm Hex Nut
Fig
9B
Fig
9A
(3)12×150mm Half Thread Hex Bolts
(6)12×37×3mm Flat Washers
(3)12mm Lock Washers
(3)12mm Hex Nuts
