www.TrailFX.com
Page
3
of
6
Rev 092215
Driver Side Installation Pictured
(Fig 5) Driver/Left front Mounting Bracket assembly
Front
Front
Front
(Fig 6) Attach Support Bracket to back of pinch weld
Front
Rotate Bolt/Nut Plate to line up correct
threaded hole with body panel and hole
in Mounting Bracket (see arrow)
8mm x 30mm Hex Bolt
(2) 8mm Flat Washers
8mm Nylon Lock Nut
12mm x 40mm Bolt/10mm Nut Plate
12mm Plastic Retainer
(Fig 3) Driver side front 2011-mid 2015.
NOTE no threaded insert in body panel
(Fig 4) Driver side front mid 2015-on and example of
all models with factory installed threaded inserts
Models without threaded
insert using Bolt/Nut
Plate, use:
10mm x 35mm Hex Bolt
10mm Lock Washer
10mm Flat Washer
Models with threaded
insert use:
8mm x 30mm Hex Bolt
8mm Lock Washer
8mm Flat Washer
(2) 6mm Hex Bolt
(4) 6mm Flat Washers
(2) 6mm Nylon Lock Nut
