3. VEHICLE SENSORS:
Refer to the sensor installation sections. You should install
both the wheel sensor and vehicle power connection.
Installing the power wire enables a continuous and brighter backlight.
Installing the wheel sensor enables speed and distance readouts.
010-ELV-197
Tech Support: (844) 378-8143
QUICK-START
1. POWER OVERVIEW
2. MOUNT ENDURANCE II:
5. SLEEP MODE:
4. MAINTENANCE REMINDER:
Endurance II can run on the internal 3.0V watch type
battery (#CR2032).
Install the power wire to enable the continuous backlight.
Endurance II is polarity independent and has safeguards
to avoid draining the vehicle battery. See the POWER
CONNECTION section for more info.
Endurance II is made to be bolted to the vehicle. Use
the included handlebar mounts, or refer to the manual
or
www.trailtech.net
for other options like the CNC
aluminum protector.
Endurance II goes to sleep if no vehicle activity is detected.
During sleep mode Endurance II uses the internal battery and will not draw down vehicle power.
a. Wakes on external power
b. Wakes on wheel movement
c. Wakes on button press
d. Backlight shuts off after 90 seconds of inactivity
e. LCD shuts off and clock is displayed after 180 seconds of inactivity.
Endurance II’s maintenance icon appears after the countdown gets to 0. Increase the countdown in DATA SETTING MODE.
The countdown can be based on either DISTANCE or TIME, select your preference in DATA SETTING MODE.
Aluminum
Protector Mount
(optional)
Power Wire
Wheel Speed
Sensor (varies)
Included
Handlebar
Mount
