Trail Tech ENDURANCE II Quick Start Download Page 3

WHEEL SENSORS

INSTALLS

Some ATVs require 

mounting the wheel 

sensor directly to the 

brake caliper.

Drill a 1/8” hole 

through the caliper 

mount, then use the 

self-tapping screw to 

secure the sensor.

BRAKE CALIPER WHEEL SENSOR

Brake Caliper 

Wheel Sensor

If the fork is close to 

the brake rotor, then 

the VHB fork sensor 

can be used. Peel 

and stick the sensor 

to the fork.

Try to have the tip of 

the sensor about 1/2 

inch away from the 

magnet in the rotor.

CONVENTIONAL FORK SENSOR

Rotor Bolt Magnet

Conventional Fork

VHB Wheel Sensor

Some kits include 

a metal C-bracket 

to help mount the 

sensor, as shown.

Use the jam nuts to 

secure the sensor to 

the C-bracket. Use 

loctite rather than 

over-tightening the 

jam nuts.

C-BRACKET WHEEL SENSOR

C-Bracket

Wheel Sensor

Trail Tech wheel 

sensors work with the 

KTM and Husqvarna 

OEM install location.

Screw the wheel 

sensor into the OEM 

caliper position. Insert 

the black magnet into 

the pre-drilled hole in 

the rotor and secure 

with the retainer clip.

KTM WHEEL SENSOR

KTM Magnetic

Retainer

KTM OEM Wheel 

Sensor Position

If there are fork 

guards next to the 

brake rotor, then the 

fork guard wheel 

sensor can be 

installed as shown. 

Try to have the tip of 

the sensor about 1/2 

inch away from the 

magnet in the rotor.

INVERTED FORK WHEEL SENSOR

Rotor Bolt Magnet Inverted Fork

Wheel Sensor

Rotor Shield

Wheel Sensor

For UTVs and quads 

with a rotor shield, 

position the sensor 

there.

Drill a 3/8” hole and 

use the jam nuts to 

secure the sensor to 

the rotor shield. Use 

loctite rather than 

over-tightening the 

jam nuts.

ROTOR SHIELD WHEEL SENSOR

MAGNET INSTALLATION:

Install a magnet on the brake rotor to trigger 

the speed sensor each wheel rotation.

Remove one of the stock rotor bolts and 

install the magnetic rotor bolt as shown, do 

not overtighten past 10 ft-lb of torque. If the 

magnetic bolt will not work, the kit includes a 

spare magnet that can be installed into one 

of the rotor spaces.  Use the included retainer 

clip or epoxy such as JB Weld to secure.

Magnetic Retainer or Spare Magnet

Magnetic Rotor Bolt

Reviews: