18
Starting the Engine
With the switch in the “OFF” position, insert the key into the ignition switch,
turn the engine kill switch to the “RUN” position and the remote engine stop
switch to the installed position. Shift to Neutral.
Pull the choke out of the lever
Turn the key switch to the “ON” position. After mounting the TrailRover™, set
the parking brake plate, press the start button on the left side. The engine will
start.
If you are attempting to start your TrailRover™ while the engine is warm, do not
pull the choke lever; leave it in the original position.
Warning
Do not start the engine indoors or in areas with little ventilation.
Release the throttle temporarily after the engine has been started.
Caution
Do not press and hold the start button continuously. Press and release the start
button to start the engine.
Do not press the start button while the engine is running to avoid damaging the
engine.
To prolong battery power, do not press the start button and hold for more than 5
seconds. Wait 10 seconds between pressing the start button.
If the engine fails to start after pressing the start button 3 or 4 times, check the
vehicle for other reasons the engine may not be starting.
In cold weather, do not leave the choke lever “OPEN” after the engine is warm
or the plug will deposit carbon which will increase oil consumption.
After your TrailRover™ engine has been running in idle for 30 to 40 seconds, it is
ready to ride.
Ready to Ride
Warning
Caution
