Trafomatic Audio Premise Evolution User Manual Download Page 4

SAFETY PRECAUTIONS

IMPORTANT SAFEGUARDS

PLEASE READ CAREFULLY ALL THE 

FOLLOWING IMPORTANT SAFE 

GUARDS THAT ARE APPLICABLE TO 

YOUR EQUIPMENT

CAUTION! TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE SCREWS. NO 
USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PER-
SONNEL.

SAFETY

1) Read the User’s Manual and refer to it frequently during use of this product 

- All the 

    safety and operating instructions should be read before the product is operated.

2) 

Retain the User’s Manual 

- The safety and operating instructions should be retained for 

    future reference.

3) 

Follow Instructions

 - All operating and instructions for use should be closely followed.

4) 

Power Sources

 - This product should  be operated using only the type of power source indi-

    cated on the marking label. If you are not sure of the type of power supply in your home, con

    sult your product dealer or local power company.

5) 

Grounding

 - This product is equipped with a three prong IEC connector.   Always use power 

    cord with adequate wire cross section and an electrical outlet that is grounded.   If you do not 

    know whether the outlet is grounded, consult your electrician or local power company.

6) 

Power Cord Protection

 - Power supply cords should be routed so that they are not likely   

    to be walked on or pinched. Pay particular attention to cords at plugs, convenience recep-  

    tacles and where they exit from the product. Always use power cords with adequate current 

    ratings and safety certifications (UL, CE, TÜV, CSA, etc.)

7) 

Fuses

 - For continued protection against fire hazard, replace fuses with the same type and 

    rating of the fuses specified. When changing fuses, completely unplug the AC cord from the 

    wall outlet.

8) 

Tubes

 - During operation, the vacuum tubes get very hot. Allow at least 30 minutes after re

     moving power for tubes to cool down.

9) 

Turn-off when not using

 - Turn off the unit as soon as you stop actively using it. Unplug the 

     power supply from the wall during a lightning storm or when the product is to be left unattend-

     ed and unused for longer periods of time.

02

PREMIS

E EVOLUTION - TUBE INTEGRATED STEREO Amplifier - 

User Manual

Summary of Contents for Premise Evolution
















Reviews: