TrafFix SLED, Manual

Page: 11 / 60

Revision E (Dated 11/26/12) 9
Figure 9: SLED End Treatment Transition.
Transition Attachment For Attaching the SLED To An Array or Barrier
The Transition is made from steel sheet and tubing that is hot dipped galvanized to minimize the affects
of corrosion. The Transition attaches to the rear of the SLED system and is fastened to the shielded
barrier with a minimum of eight anchor bolts, with nine bolts preferred.
Overall Dimensions:
Width: 22 3/8” [568 mm]
Height: 20 7/8” [530 mm]
Length: 49 5/8” [1260
mm]
The Transition consists of
a frame, right and left
panels, and connection
pins. The frame, Figure 9
and 11 (or on pg. 44) is
connected to Module 1.
The transition frame is de-
signed to attach to either
the five or six knuckle end
of the rear module, Figure
10 (or on pg. 45).
Figure 10: SLED End Treatment Transition Frame installation to both ends of a module.