Connecting the Components to the Sign
Connecting the Components to the Sign
After you have mounted all of the components on the trailer you need to connect everything with the sign.
Along the bottom of the sign you will find connectors or cables for the camera (Ethernet and power),
illuminator, and the trailer battery box.
Figure 11: Connectors on the underside of the sign
Refer to the relevant sections of this document for details on how to connect each of the components. In
addition, you also need to connect the sign with the solar panel. See
Connecting the Sign to the Solar Panel
below for details on how to connect the sign with the solar panel.
Connecting the Sign to the Solar Panel
The sign and solar panel come pre-wired with matching connectors that allow for a simple installation.
Typically this will be 2-wire Quick Connectors. However, some smaller solar panels may only use single-wire
connectors. The following sections describe how to connect the solar panel and sign in each of these
situations.
Connecting the Solar Panel with a 2-wire Quick Connector
As shown in the following images, the red (male) and black (female) connectors from the sign need to be
connected to corresponding connectors on the solar panel.
SafePace® Guardian Trailer Installation Guide
p. 19
