Wiring the Solar Panel to the Sign (1-wire EZ connector)
2.
Screw the cover on the sign connector over the joint. Be careful not to over tighten it.
3.
Open the sign then connect the battery connectors to the solar charger as shown in the following
image.
W
ARNING
:
Before ever doing any maintenance on a sign, it is critical that the power is first turned off.
This will prevent accidental electrical shock that can be fatal and that can also damage electrical
components.
W
ARNING
:
It is vitally important, whenever you close the sign, that you close and lock
all
of the latches
properly to avoid water infiltration as this could damage the sign and void your warranty.
SafePace® Evolution11 Installation Guide
p. 22
