HOW DO I PROTECT MY PAINT FINISH?
1) Use a protective Cover on the Grill and touch-up paint to repair any scratches.
A
TRAEGER GRILL COVER to protect the Grill is highly recommended! Covers
and touch-up paint are available from your local Traeger Dealer, or log on to
our Web Site –
.
2) Every 90 days, use a high quality car wax on the outside surfaces of the Grill. ONLY
APPLY WAX TO A COLD GRILL.
WHERE CAN I GET A NEW PART FOR MY GRILL?
Check with your Traeger Dealer. They may have the part in stock or can order the part
for you. Or you can contact the Traeger Parts Department
(SECTION SEVEN)
to place
an order. In either case, please provide your name, phone number, address, Model and
Serial Number of the Grill (located on a label inside the Hopper Lid), along with the part
identification.
SECTION SEVEN: TRAEGER SUPPORT
Parts are identified in the front of this manual on the COMPONENT DIAGRAM PAGE.
To order parts: Call, E-mail or write to your Traeger Dealer or Traeger Pellet
Grills. Please provide your name, phone number, address, Model and Serial
Number of the Grill (located on a label inside the Hopper Lid), along with the part
identification.
TRAEGER PELLET GRILLS, LLC.
9445 SW Ridder Road #310
Wilsonville, OR 97070
TRAEGER TECHNICAL SUPPORT
Available 24/7
TRAEGER PARTS DEPARTMENT
Available Weekdays 8AM to 4:30PM
Pacific Time
TRAEGER SALES/ORDER DESK
Available Weekdays 8AM to 5PM
Pacific Time
TOLL-FREE TELEPHONE: 1-800-872-3437
E-mail: [email protected]
Website: www.traegergrills.com
