manualshive.com logo in svg

Traeger 833853, Owner'S Manual

Share
Download
Traeger 833853 Owner'S Manual Download Page 8

8

1.  Remove all items from inside the grill barrel and 

pellet hopper.

2.  Attach legs to grill frame assembly and braces  

to legs.

3.  Attach the chrome door handle and side handle.
4.  Assemble smokestack: attach the flue pipe to the 

grill frame assembly and mount the chimney cap 
assembly.

5.  Position the heat baffle over the hopper assembly.

6.  Position the grease drain pan over the heat baffle.
7.  Position the porcelain-coated grill grate and extra 

grill rack.

8.  Hang the grease bucket.

TOOLS SUPPLIED FOR ASSEMBLY
(2) Open-end wrenches
(1) Hex key (Allen wrench)
(1) Screwdriver

COMPLETE THESE STEPS TO GET TRAEGER'ING 

(REFER TO THE ASSEMBLY GUIDE)

GRILL COMPONENTS

GET TO KNOW YOUR GRILL

Part

Description

Part

Description

1

Smokestack

7

Grill Door

2

Extra Grill Rack

8

Digital Pro Controller

3

Porcelain-Coated Grill Grate

9

Auger (Pellet Hopper Interior)

4

Grease Drain Pan

10

Pellet Hopper Clean-out Door

5

Heat Baffle

11

Dual Meat Probes

6

Grease Bucket

Probe

Selector

Probe 1

Probe 2         

1

2

3

4

5

6

11

7

8

9

10

66103_PRO15_v10.indd   8

11/12/15   11:30 AM

Summary of Contents for 833853

































Reviews:

No comments

Brands by name

Popular brands

Load more brands