Traditional Tool Repair SIGNODE RC-1435-50, Operation, Parts And Safety Manual, Page: 6 / 7

6
PARTS LIST
KEY QTY. PART NO. DESCRIPTION
1 3 003911 Nut
2 2 004047 Side plate
3 2 004056 Jaw pin
4 2 004046 Notcher
5 4 004049 Link pin
6 2 004048 Front link
7 1 004057 Spacer
8 2 004053 Rear link
9 2 004052 Jaw
10 2 003974 Fulcrum pin
11 1 004054 Upper handle assembly
12 2 020378 Handle grip
13 3 003972 Tie bolt
14 1 020396 Lower handle assembly
15 1 003132 Warning label
16 2 004939 Drive screw
17 1 002480 Nameplate
! When ordering parts, please show tool model, part number and description.
!
Standard hardware parts may be obtained from local hardware suppliers.
TOOL MAINTENANCE, CLEANING & LUBRICATION
1. Clean and apply a light weight machine oil to all moving parts on a weekly basis.
2. Clean the feedwheel of the tensioner tool daily with a wire brush.
3. Inspect the tool before each use for worn or broken parts. Replace parts if necessary.
WWW.TRADITIONALTOOL.COM
For Parts & Service 1-877-862-6699