-- Wide Dual Band Booster (Model: PODRP27)
11
User Manual
After switch on power supply, please check indication LED as following items.
-
You can switch attenuation value by using repeater side switch, If you want
to set attenuation 18, you push switch16 and switch 2 on.
-
Make sure the repeater full output power LED (Downlink output power) is
on when finishes commissioning.
-
And set UL ATT> DL ATT+5dB to balance the downlink and uplink and
limited the interference to BTS in uplink direction.
-
You can change donor antenna direction or installation position to get
bigger signal;
-
You can set attenuation to add or r educe repeater gain; or you can check
cable and connector link status to reduce cable loss and insert loss
between repeater and antenna.
www.amplificadorcelular.com PBX (1) 231 9661 Cel 310 309 9002
