14
Z119
D193
Attach the door hinges 1 ‘hinge length’ from
each end of the door. To do this, place the
hinge flush with the end of the door frame
and make a mark on the frame at the end
of the hinge. Now move the hinge down
until it is level with mark, drill holes for your
rivets and attach.
Use the drill bit to drill pilot holes through the
door bracing into the door sheeting.Flip the
door back over to the front side facing up.
Using the pilot holes drilled before, fix the door
bracing from the front with Rivet and Spacer.
d
Rivet
H074x1
Z119x2
Hingex2
Bolt（door outside）x1
Rivet
Rivet
Rivet
H074
D193
D193
Summary of Contents for GS512-V1
Page 5: ...ASSEMBLY INSTRUCTIONS iii...
