tradetested GS503-V1, Owner'S Manual

Page: 7 / 21

S
TEP
2
2
i
Assemble the rear wall panels
All pre-drilled holes should line up with the peaks of the steel sheet. If this varies
squeeze together or stretch out the panels to make sure they line up.
a
Part #W190 x8
i
#U155
#U155
#U155
#U155
All panels should overlap by one corrugation.
#U155 x4
b
Lay the wall panels out with the large rib
overlapping the small.
Large Rib Small Rib
Joint outside
Joint inside
The notched end of #U155 and #U079 must
be used at either end of the panel
Out side of shed
In side of Shed
Notched ends
are orientated
to the inside of
the shed
U-channel joint
Drill screw in joint