Tradesman M3052LW, Owner'S Manual

Page: 7 / 27

CARTON CONTENTS
UNPACKING YOUR MITER SAW
To avoid injury from unexpected starting or electrical shock, do
not plug the power cord into a source of power during unpacking
and assembly. This cord must remain unplugged whenever you
are adjusting/assembling the saw.
1.
Remove the miter saw from the carton. IMPORTANT: Do
not lift the miter saw by the switch handle or miter table
handle. It may cause misalignment. Lift only by the built-in
carry handle located at the top of the machine.
2. Place the saw on a secure stationary work surface.
3. Separate all parts from the packing material. Check each one
with the illustration below to make certain all items are
accounted for, before discarding any packing material.
If any part is missing or damaged, do not attempt to assemble the
miter saw, or plug in the power cord until the missing or
damaged part is correctly replaced. To avoid electric shock, use
only identical replacement parts when servicing double insulated
tools.
Miter Table
Handle
Blade Wrench
Dust Bag
Hold-down
Clamp
7
CAUTION
!
CAUTION
!
Top (long) leg
bracket
Extension Wings
Screws
Bottom
(long) leg
bracket
Stand legs
Rubber foot
pad
Top (short) leg
bracket
Bottom (short)
leg bracket
Hardware bag