1
CHANGING THE BATTERIES (FIG. 29)
Unplug your saw.
CAUTION!
Failure to unplug your saw could result in accidental
starting causing possible serious personal injury.
1. Remove the laser guide from the saw.
2. Loosen and remove the two screws (1), then remove
the laser guide cover.
3. Remove the three batteries by sliding them out from
their mounting braces using a non-conductive devise
such as a toothpick.
4. Replace the batteries that have a rating of 1.5 volts
(Number LR44).
5. Replace the laser guide cover, two screws and laser
assembly onto the miter saw.
Note:
When replacing the batteries, the battery cover should be
thoroughly cleaned. Use a soft paintbrush or similar
device, to remove all sawdust and debris.
Fig. 29
CHANGING THE LASER BATTERIES
21
Summary of Contents for M3052LW
Page 25: ...25...
