6
HARD WIRED INPUT
To connect other devices such as CD player, Blu-Ray player etc. to play through the speakers
please follow the steps below:
To play music via the speaker hard wired facility, connect RCA cable to L-R and Ground wire
to the terminal marked AUX on the amplifier shown in “Image 1”, these cables can then be
connected to remote inputs such as RCA or Banana jacks in a wall plate located down a wall
lower to the floor or elsewhere from the ceiling.
Note: To ensure the best possible sound without humming or noise or poor grounding, it is
recommended to use quality shielded RCA cable.
Image 1.
Image below shows example of a fixed wall connection link to the AUX terminals:
CREATE STEREO PAIR WITH PASSIVE SPEAKER
The active speaker containing the amplifier and power supply is designed to connect to the
additional passive (slave) speaker in the MESPBT pack via the speaker output (+/-)
Use wire cutters to strip the ends of the speaker cable (if required) and connect to the terminals
of the passive speaker and corresponding terminal at position (1) on the amplifier PCBA in
“Image 2”.
