Mar-18
Product Code: 2829
Made in China to TQB Brands Pty Ltd specifications
Page 5
Visit us at www.tqbbrands.com.au
ASSEMBLY, OPERATION, PREVENTITIVE MAINTENANCE
1.
FEATURES
The TradeQuip Air Actuated Garage Jack utilises compressed air to activate a booster
cylinder, to move hydraulic oil within the cylinder up & down. It adopts a heavy duty
hydraulic design combination of compressed air and hydraulic pressure, to create, strong
jacking capacity and low lifting clearance in one jack. This floor jack lets you really get under
your loads with a 245mm minimum height. Designed to lift trucks, buses and other large
commercial and agricultural vehicles with maximum stability.
2.
ASSEMBLY
Assembly of Handle: After removing from the packing material, make sure the product is
in perfect condition and that there are no visible damaged parts. Dispose of the packaging
material responsibly.
1.
Attach the height adaptor holder to the lower handle with two (2) U-bolts and nuts.
2.
Tighten the nuts to secure the height adaptor holder to the handle.
3.
Place the height adaptors into the adaptor holder.
4.
Place the handle assembly into the handle socket and secure with bolt.
Bleed Air from the Garage Jack: Air can accumulate within a hydraulic system during
shipment or after prolonged use. This entrapped air causes the jack to respond slowly or
feel “spongy”.
To remove the air:
To bleed this unit, open the hydraulic system by turning the control knob anti-clockwise.
Depress the air actuator and pump air through the system for 15 seconds. Turn control
knob clockwise and unit should be bled.