Product Code: 2701T
Made in China to TQB Brands Pty Ltd Specifications
Page 8
Visit us at www.tqbbrands.com.au
7.
STORAGE
When not in use this jack should always be stored in a dry location on a level surface with
the lift arm and saddle in the fully lowered position.
8.
SERVICE & REPAIR
Any jack found damaged in any way, or found to be worn or operates abnormally should
be removed from service until repaired by an authorised service agent. Owners and / or
operators should be aware that repair of this product may require specialised equipment
and knowledge. Only authorised parts, labels, decals shall be used on this equipment.
Annual inspection of the jack is recommended and can be made by an authorised repair
facility to ensure that your equipment is in optimum condition and that the equipment
has the correct decals and safety labels specified by the manufacturer.
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
ACTION
Jack will not lift to full height
Low oil level
Check oil level
Jack will not hold load
Release valve not closing
Hydraulic jack oil
contaminated
Pump valves not sealing
Cylinder ram binding
Remove and clean valve
Change jack oil
Lubricate valve stems
Call service agent
Lift arm will not lower
Cylinder ram binding parts
worn
Internal damage
Broken return spring or
unhooked
Lift are linkage bent or
binding
Call service agent
Jack feels spongy when lifting
See System Air Purge under
Maintenance section
See Maintenance Air
purge procedure
