Product Code: 2701T
Made in China to TQB Brands Pty Ltd Specifications
Page 2
Visit us at www.tqbbrands.com.au
WARNING INFORMATION
IMPORTANT: READ ALL INSTRUCTIONS BEFORE USE
WARNING
The instructions and warnings contained in this manual should be read and understood before
using or operating this garage jack. Do not allow anyone to use or operate this jack until they
have read this manual and have developed a thorough understanding of how this jack works.
Failure to observe any of the instructions contained in the manual could result in severe
personal injury to the user or bystanders, or cause damage to the equipment and property.
Keep this manual in a convenient and safe place for future reference.
Whilst every effort has been made to ensure accuracy of information contained in this manual,
the TradeQuip policy of continuous improvement determines the right to make modifications
without prior warning.
Read, study and understand all warnings and operating instructions prior to use.
Do not overload this jack beyond the rated capacity.
This jack is designed for use only on hard level surfaces capable of sustaining the
load.
This is a lifting device only. The load must be supported immediately by jack stands.
Do not get under or allow anyone under the vehicle until it has been supported by
jack stands.
Lift only on areas of the vehicle as specified by the vehicle manufacturer.
Centre load on saddle prior to lifting.
Some vehicles require an adaptor to properly engage the frame for lifting. Use the
vehicle manufacturer’s instruction on proper lifting.
No alterations to the jack shall be made.
Only attachments, restraints or space adapters supplied by the manufacturer shall
be used.
Failure to heed these warnings may result in personal injury and / or property
damage.
Activate the hazard warning flasher, turn off ignition, set the parking brake, move
automatic shift selector to park position. In case of manual transmission move gear
selector into reverse position. In addition, the wheel diagonally opposite from the
wheel being lifted shall be chocked in both directions.
Follow tyre changing procedure or tyre chain mounting procedure specified by the
vehicle manufacturer’s owner’s manual.
No alterations shall be made to this hydraulic trolley jack.
