05/20
Product Code: 1096T
Made in China to TQB Brands Pty Ltd specifications
Page 4
Visit us at www.tqbbrands.com.au
ASSEMBLY, OPERATION, PREVENTITIVE MAINTENANCE
1.
FEATURES
TradeQuip "Made for the Trade" Direct-Fired Forced Air Workshop Heaters are ideal for workshops, garages and warehouses,
reducing concrete freeze and emergency heating. Ideal for quickly and efficiently heating cold condition workshops, this
forced air heater can be used in a variety of commercial and industrial settings and is fueled by kerosene or diesel. It is a
reliable heating solution for a cold work space and is easy to move and position as required thanks to the ergonomically
designed inbuilt handle.
2.
ASSEMBLY
Unpacking: after removing the packing material, make sure the product is in perfect condition and that there are no visible
damaged parts. The packaging materials (Polyethylene bags, polystyrene etc.), must be disposed of in an appropriate refuse
collection container. Recycle cardboard.
1.
To assemble the heater, proceed as follows:
2.
Insert the wheel shaft J to the corresponding hole of feet pipe E
，
insert the cotter K to the corresponding holes; put plain
washer I to the two sides of shaft, slide the wheel H over the wheel shaft J
，
screw the nut G to fix the wheel on the shaft.
3.
Put the heater body on the feet pipe assembly, make sure the 4 holes of handle A point towards the corresponding 4
holes on the feet pipe respectively.
4.
Using the screw B, spring washer C, plain washer D and nut F to fix the feet pipe assembly and handle to the tank.
Description
Qty
A
Handle
1
B
Screw
6
C
Spring washer
6
D
Plain washer
6
E
Feet pipe
1
F
Nut M5
6
G
Nut M12
2
H
Wheel
2
I
Plain washer ø12
2
J
Wheel shaft
1
K
Cotter
1
