10/21
Product Code: 1035T
Made in China to TQB Brands Pty Ltd specifications
Page 3
Visit us at www.tqbbrands.com.au
STANDARD OPERATING PROCEDURE
DO NOT
use this equipment unless you have been trained and assessed to a competent level in its sate use and operation,
and have been given permission to use this
PRE-OPERATIONAL SAFETY CHECKS
Save these instructions. For your safety, read, understand, and follow the information provided.
•
When servicing, use only TradeQuip identical replacement parts. Use of any other parts will void the warranty.
•
Ensure the Evaporative Cooler is disconnected from power before servicing.
•
Use the right product for the job. There are certain applications for which the Evaporative Cooler was designed.
•
Do not modify the Evaporative Cooler and do not use the Evaporative Cooler for a purpose for which it was not intended.
•
For cleaning purposed only remove the guard “The Fan is to be Switched Off from the Power Supply) prior to removing the
guard
•
This appliance is not intended for use by persons with a lack of experience and knowledge.
•
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualitied persons in
order to avoid a hazard.
OPERATING CONDITIONS
•
Temperature: 18°C to 45°C; Water temperature: <45°C
•
Power supply must not exceed the required voltage (+/-) 5%.
•
Air supply must be largely free of dust or extra cleaning is required.
•
Protect the power cable from vehicle and foot traffic. Connection to incorrect electric voltage, or faulty installation, may
cause risk of electric shock.
•
Keep doors and windows open to allow fresh air to enter, and treated air to exit, when the cooler is in operation.
•
Flashing red light on the control panel means water level in reservoir is low.
•
Rinse the reservoir with fresh water and clean prior to use after a period when the cooler has not been in operation.
•
Take care when moving the cooler, especially when it is full of water to avoid the cooler from overbalancing, which may
cause the cooler to tip over, which may cause injury and/or damage to the cooler.
•
To prevent build-up of algae and other biological organisms in the reservoir, regularly add chlorine/bromine tablets as per
tablet manufacturer recommendation for use in evaporative cooler reservoirs.
INTENDED USE
This equipment is intended for cooling industrial or trade workshop/office environments. Best used in hot dry climates where
the humidity is low, evaporative coolers are generally suitable for areas with dry summers, although their effectiveness will be
reduced during the occasional periods of high humidity weather.
This product is an Industrial Product and not suitable for household use.
DO NOT tilt the unit
DO NOT operate the unit with wet or damp hands
