Trademaster BM-20 Plus, Operator'S Manual

Page: 6 / 21

BM-20 PLUS Operator’s Manual 6
2. SAFETY PRECAUTIONS
1. Before beginning, read this Operator’s Manual and complete proper occupational
safety and health training.
2. The machine must be used only in applications specified in this Operator’s Manual.
3. The machine must be complete and all parts must be genuine and fully operational.
4. The electrical supply specifications must conform to those specified on the rating plate.
5. The machine must be plugged into a properly grounded (earthed) socket-outlet.
6. Never pull the power cord as this may damage it and result in electric shock.
7. Untrained bystanders must not be present near the machine.
8. Before beginning, check the condition of the machine and electrical supply, including
power cord, plug, control panel components, and milling tools.
9. Keep the machine dry. Exposure to rain, snow, or frost is prohibited.
10. Keep the work area well lit, clean, and free of obstacles.
11. Never use machine near flammable liquids or gases, or in explosive environments.
12. Use only tools specified in this Operator’s Manual.
13. Never use dull or damaged tools.
14. Mount the cutting inserts and the milling cutters securely. Remove adjusting keys
and wrenches from the work area before connecting the plug to the power outlet.
15. If the cutting edge of an insert is worn, rotate the insert in the socket by 90° or, if
all edges are worn, replace with a new insert specified in this Operator’s Manual.
16. Before every use, inspect the machine to ensure it is not damaged. Check whether
any part is cracked or improperly fitted. Make sure to maintain proper conditions
that may affect the operation of the machine.
17. Always use eye and hearing protection, non-skid footwear, gloves, and protective
clothing during operation. Do not wear loose clothing.
18. Do not touch moving parts or metal chips formed during milling. Prevent objects
from being caught in moving parts.
19. After every use, remove metal chips from the machine, especially from the milling
cutters. Never remove metal chips with bare hands. Clean the machine with a
cotton cloth without using any agents.
20. Cover steel parts with a thin anti-corrosion coating to protect the machine from
rust when not in use for any extended period.