Installation
39
5.
Repeat for the additional heat sink.
Installing the heat sink
To install the heat sink:
1.
Apply thermal compound evenly on the top of the CPU.
2.
Remove the protective cover from the underside of the heat sink.
3.
Place the heat sink on top of the CPU, until it is seated firmly in place.
4.
Tighten the four retaining screws clockwise, in the order shown, to secure
the heat sink.
5.
Repeat for the additional heat sink.
6.
Install the access panel (on page 24).
Processor
Removing the processor
CAUTION:
ESD protection must be worn during the procedure to avoid
damaging the components.
To remove the processor:
