background image

TracVision R6ST Installation Guide

1

KVH, TracVision, and the unique light-colored dome with contrasting baseplate are registered trademarks of KVH Industries, Inc. 

All other trademarks are property of their respective companies. The information in this document is subject to change without notice. 

No company shall be liable for errors contained herein. © 2007 KVH Industries, Inc., All rights reserved. 

54-0333 Rev. B

These instructions explain how to install the TracVision R6ST satellite TV antenna system on an 
RV or motor coach. Complete instructions on how to use the system are provided in the 

User’s 

Guide

.

Installation Steps

Who Should Install the System?

To ensure a safe and effective installation, KVH recommends that a KVH-authorized technician 
install the TracVision R6ST

 

system. To find a technician near you, please visit 

www.kvh.com/

wheretogetservice

. If you purchased the product and decide to install it yourself, please see the 

enclosed warranty statement for warranty implications.

Related Documentation

The following additional documents are provided with the TracVision R6ST system:

Technical Support

If you need technical assistance, please contact KVH Technical Support:

1.

Inspect Parts and Get Tools...3

2.

Plan the Installation...4

3.

Remove the Restraints...5

4.

Mount the Antenna...6

5.

Wire the Antenna...7

6.

Wire the Receiver...8

7.

Connect Power...9

8.

Mount the Receiver...10

9.

Test the System...11

10.

Educate the Customer...12

Document

Description

User’s Guide

Complete operation, setup, and troubleshooting 
information

Product Registration Form

Details on registering the product with KVH

Warranty Statement

Warranty terms and conditions

Contents List

List of every part supplied in the kit

Phone: +1 401 847-3327
E-mail: [email protected]

Summary of Contents for R6ST












Reviews: