8
a.
If you cut the antenna cable, use an Augat
IT1000 tool to attach a Snap-N-Seal
®
F-connector to the end of the connector
(see
).
b.
Connect the antenna cable (A) to the “To
KVH Antenna” jack
(see
c.
Connect the RF converter cable (B) to the
“RF Remote Input” jack.
d.
Connect the receiver to the TV’s video
input. Choose one of the following
options:
Option 1 - RCA-type jack (cable included)
Option 2 - S-Video jack
e.
Connect the receiver to the TV’s audio
input. Choose one of the following
options:
Option 1 - RCA-type jacks (cables
included)
Option 2 - Digital audio jack
NOTE:
For details on connecting additional
receivers, refer to the User’s Guide.
NOTE:
If the TV has only a coaxial input,
you will need an RF modulator (KVH
P/N 19-0475).
Do not use a screw-on, push-on, or
twist-on connector. Low-quality
connectors will degrade the system
performance and KVH’s warranty
does not cover repairs resulting from
the use of such connectors.
IMPORTANT!
Wire the Receiver
6
Figure 13 Augat Tool
Figure 14 Receiver Wiring
C AU T I O N
S -VIDEO
VIDEO AUDIO L AUDIO R
RF
REMOTE
INPUT
DIGITAL
AUDIO
OUT
TO
110W/HD
CONVERTER
TO KVH
ANTENNA
Tested to comply
with FCC Standards
RF Converter
Receiver
To Audio
(Option 1)
To Video
(Option 1)
To Video
(Option 2)
To Audio
(Option 2)
Y
R
W
(B)
(A)
Roof
