Wiring Option 2
CONSTANT POWER INSTALLATION
Installing this way will allow the stereo to play at all times, even if the key is
not
in the
on position. If the stereo is installed this way, the stereo does have the ability to drain the
battery if the radio is left on for an extended amount of time.
1.
With a razor blade score and then strip away the insulation on the end of the wiring
harness.
2.
Connect the green wire to the white wire before the
butt connector
using the
t-tap
and
male connector
.
3.
Then connect the white wire to one end of the
fuse holder
using a
butt connector
.
4.
Install a
ring terminal
on the other end of the fuse holder and connect it to the
positive lead on the battery.
5.
Install a
ring terminal
on the black wire and connect it to the negative lead on the
battery.
CAUTION:
Install the 15 amp fuse in the fuse holder after the positive and negative
leads are connected to the battery.
