Wiring Option 1
STANDARD ACCESSORY POSITION INSTALLATION
Installing this way will only allow the stereo to be turned on if the key is in the
accessory position. This will also always turn the stereo off when the key is in the off
position.
1.
With a razor blade, score and then strip away the insulation on the end of the
wiring harness.
2.
Attach the
green
trigger wire to the factory accessory position on the key ignition
switch using the
male connector.
3.
Using a
butt connector
, attach a lead wire of the
fuse holder
to the
white
power
wire of the MAC.
4.
Then attach the other lead wire of the
fuse holder
to the
positive
lead on the
battery, using a
ring terminal
.
5.
Install the black wire to the
negative
lead on the battery using the other ring
terminal.
CAUTION:
Install the 15 amp fuse in the fuse holder after the positive and negative
leads are connected to the battery.
