MS 32/2/A R 03/03
4
INSTALLATION OF HF 32/2/A LOAD CELL
Positioning the adjusting pin as a function of the effort in the wire rope
Important remarks
- Before loading and if no preadjustment has been made in the factory, unscrew the
adjustment screw at the most, because you risk to destroy the transducer.
- To select pin and bracket position, load has priority over wire rope diameter.
- Never remove the locking nut (G) because tare screw (F) could damage the
microswitch.
For wire rope from 22 mm to 26 mm diameter
and for loads ranging from 500 kg to 6000 kg.
For wire rope from 17 mm diameter and for
loads ranging from 300 kg to 2300 kg.
For wire rope from 18 mm to 22 mm diameter
and for loads ranging from 350 kg to 5000 kg.
Fig. 2
Summary of Contents for HF 32/2/A
Page 8: ...MS 32 2 A R 03 03 8 NOTES ...
