Technical
DYNAROPE
REF
: 2025GB
DIGITAL
DISPLAY
rev
N°
3
Sheet
HF 87/A
date : 04/03
page : 1/1
APPLICATIONS :
This model is an analogue display unit which converts the tension signal generated by the strain a corresponding
value expressed in daN . This display is calibrated in the factory on customer’s request.
A correction abacus is worked out on the basis of the wire rope specification and the load to be checked.
This display unit is recommended as an economic solution for adjustment operations or load checks on wire rope
used under specific repetitive conditions. ( Aerial or most guy ropes of a single distribution network, etc.) .
TECHNICAL SPECIFICATIONS :
Display in force units (to precise when you place the order)
Display : 3 1/2 digit . LCD 14 mm
Display accuracy :
•
+/- 1 % of the target value.
•
Refer you to the correction abacus for the nearby
values.
Calibration in factory following customer information :
•
Wire rope type
•
Target tension
IDENTIFICATIONS :
Input Signal: mV/V
Protection : IP 54
Temperature : from -10° to + 50°
Dimensions : H 80 / L 80 / P 40 / mm
Weight : 350 gr
Supply : 1 incorporate battery type : 9V PP3
Battery life : 15 hours with full charged high
power battery
HF 87/A Display
55288
3 m cable to connect sensor with level to display 4 pin "Lemo"
75057
Leather protection case
49358
11
