CAMON LS42B1 Lawn Scarifier
LS42B1-02/2022.A
Page 21
Renovation Cartridge
Undo the grub screw located in the clamp and then remove the clamp from
the end of the rotor shaft.
Slide the blades and spacers off the rotor shaft.
Once the worn blades have been removed the rotor shaft should be checked
for wear and if serviceable can be reused and the new blades located.
The hexagonal rotor shaft allows the blades to be fitted in three orientations.
Each blade should be rotated by 120
o
so that it sits on a separate face of the
rotor shaft.
After each blade has been fitted, a spacer should be added.
When fitting the blades ensure that the points of the blades are all facing the
same direction (see image above).
Once all the blades and spacers are in place, fit the clamp and tighten the
grubscrew.
Re-attach rotor to the chassis as described in section 7.3.3.
7.4 Engine
7.4.1 Check Engine Oil Level
This is to be checked prior to each use and every 8 hours during operation.
Check only when the engine is off and in a horizontal position.
Clean the oil filler plug and its surrounding parts.
Remove the oil filler plug. Clean the dipstick with a clean cloth and put the
oil filler plug all the way back into the engine. Remove the oil filler plug and
check the oil level.
Refill the oil if indicator shows more is required. For the Honda GX160 the
recommended oil is SAE 10W/30 API SJ or equivalent.
Rotor Shaft
Spacer
Blade
