hole first and mount the Air Splitter using the supplied hardware (hand tighten until
all hardware is installed). After drilling each hole, remove any plastic shavings that
might be between the Air Splitter and the air dam to ensure a snug fit. Drill every
other hole and attach the hardware as you go. NOTE: The temporary clips are
guides only. As you drill the actual holes, you may have to adjust the Air Splitter
with the air dam for proper alignment.
5. After all the holes are drilled and all the
hardware is mounted tighten all of the nylon
nuts using a wide-tip, flat-head screwdriver.
You should be able to hold the nut from
turning with your hand.
Be sure not to over-
tighten! It does not take much force. The
nylon nut distorts the threads a little when
tightening, giving you a good secure
mounting. There are two extra nylon nuts
and bolts supplied.
If you damage the Air Splitter, replacements will mount back into the same mounting
holes. Cheaper than a new air dam!
We hope you enjoy your new Track Dog Air Splitter. If you have any comments or
suggestions, please let us know. We also offer the Air Splitter for other models of the
Miata and other unique items
.
We appreciate your business,
Gary Shuhart
TRACK DOG RACING
www.trackdogracing.com
11010 Switzer Ave., Suite 107
Dallas, TX 75238
Ph. 469-916-3200
Fax 214-349-9342
