Tracer TRACER START, User Manual

Page: 12 / 32

12
User’s manual
Vehicle DVR
TRACER
START
EN
C. Setting Mode:
Whether under Video mode or capture mode, press Menu Button
twice to enter into Setup interface.
1. Format: Select it if you want to format the SD card.
2. Language: Select [English/Chinese/Japanese/Russian]
3. System Reset: Select [Cancel or Execute system] reset.
4. Light Frequency: set [50/60Hz].
5. Date Input: Set correct recording Date and time by Rec Button and
Up /Down Button.
USB Mode
Connect DVR with computer by USB cable, [My computer] will occur
removable disk, the file is stored at Removable Disk/DCIM/1OODSCIM.
At the moment, the file of the DVR can be downloaded to the computer.
Note:
1. Please insert the SD/ MMC card before recording.
2. This DVR records in cycle if you choose 1/3/5/10 minutes as storage
time.When the storage medium is full, it will record from the beginning
again and erase over the previously recorded material automatically.
lt will have 3 seconds pause time,and namely the contents in the 3
seconds will not recorded.
3. Because the DVR is DC5V input,please use the attached car charger.
lt have adaptor 12V/24V transfers to 5V already.