Tracer Splash L BT TWS, Instructions For Use Manual

Page: 10 / 42

Instructions for use
EN
10
Tracer Splash L
BT TWS
Charging
1 . Plug the USB cable into the speaker connect to the 5V charger or computer to
charge the speaker.
2. When charging, the „charging” red indicator light on when it is full the red light is
out.
Other
1. The default volume of the speaker is 2/3 of the total volume.To protect battery life
and speakers work, so the software Settings when the battery voltage is lower
than 3.3V speakers will automatically detect the concurrent give out sound prompt
alarm, when battery voltage is lower than 3.3 V the speaker makes a voice prompt
and set up automatic shutdown meantime.
2. When the speaker standstill, the speaker will power off automatically if not use
the speaker 10 minutes. If need play again ,needs to power on the speaker again.
Specification parameters:
1. Bluetooth Version: V5.1 Chip:JL
2. Bluetooth Range: 10 meters
3. Output power: RMS 10W (5W*2)
4. Driver Size: 50 mm * 2pcs
5. Frequency response:100 Hz-20 KHZ
6. Built-in battery:1200 mAh / 3.7V
7. Sensitivity: 84±2 dB
8. Signal to noise ratio: ≥65 dB
9. Distortion: 1%
10. Charge time: 2.5-3.5H
11. Waterproof IPX6
12. Function: Hands-free call/U-disk/TF Card /AUX /BLUETOOTH/ TWS Func -
tion
13. Product size:75*75*148mm
Package Includes
• Speaker x 1 pcs
• 3.5mm Audio Cable x 1pcs
• Micro USB Charging Cable x1 pcs
• User Manual x 1 pcs