13
Instructions
for use
EN
Steering wheel
Roadster 4in1
For use with PS3
•
Connect the wheel to PS3 console; and connect the pedal to the wheel
•
Power on the PS3 console.
•
The active channel LED indicator will light up when connection is made, after which the
wheel is ready for play or set up.
•
During PS3 game play, press the HOME button once to enter the XBM window;
•
Press and hold the MODE button to enter MENU setup window.
For use with PS4
•
Connect the wheel to PS4 console; and connect the pedal to the wheel
•
Power on the PS4 console.
•
Connect the racing wheel to original PS4 controller by a USB cable, consider the con
-
troller as a key to establish the connection between the controller and racing wheel( The
controller must be powered off)
•
When the connection been established, the red LED will turn on, press the HOME button,
and it is ready to play the game or set up the console functions
•
During PS4 game play, press the HOME button once to enter the XBM window;
For use with XBOX ONE
•
Connect the wheel to XBOX ONE console; and connect the pedal to the wheel
•
Power on the XBOX ONE console.
•
Connect the racing wheel to original XBOX ONE controller by a USB cable, consider the
controller as a key to establish the connection between the controller and racing wheel
(The controller must be powered off)
•
After the connection been established, the red LED on racing wheel is on, and a LED
indicator on the controller also is on. Then, you can start the game.
•
During XBOX ONE game play, press the HOME button to return back to the main menu;
For use with PC
•
X-input mode(default model), red LED and 1st channel LED solid light
•
Press HOME button for 3s to shift to D-input mode, red LED blink 6 times to solid light,
channel LED off
•
Press HOME button again to back to X-input mode
Installation(D-input mode)
Start Windows and put the CD into CD-ROM. Double click SETUP and follow on-screen in
-
structions to complete the driver installation.
To connect the wheel to your PC, use the following sequence
Start → Control Panel → Device and Printer → right click the device and printer → Game
controller → Properties.
Wheel Test
•
Enter Test interface to test buttons and axis functions
•
Enter Calibration interface to calibrate the axis
•
Enter Vibration interface to test axis and pedals
