Tracer Oxygen GS3, Instructions For Use Manual

Page: 23 / 96

23
Instructions for use
Battery
Remove and install the battery.
When installing/removing the battery follow these
steps:
• Remove the battery cover;
• Insert/Remove the battery and make sure the battery metal PIN
completely contact with the battery compartment on the phone,
and then push the battery to insert to the phone.
• Put the battery cover on.
Warning: remove battery previous must turn off your cell pho -
ne. It is forbidden to boot or have other external power of con -
nection directly take out the battery, or possible damage to the
SIM card and a mobile phone.
Battery charging
• Plug the charger connector with the phone, and plug the charger
into the electrical outlet.
• At this time the charge level icon will repeatedly flash at the top
right corner of the mobile phone’s screen; If the mobile phone
charging while power off, a charging indication will appear on
the screen. If the mobile phone was used even after there was
insufficient power, it might take some time after having begun
charging until indication of charging appears on the screen. The
first three times you recharge, you’d better keep 12-14 hours, as
this will help extend battery life. The mobile phone and charger
will become warm during charging and this is normal.