Interactive Touch Monitor-TD Series
Interaction in Life
10
Resource automatic switch
For model with build-in PC, HDMI on build-in PC and preposed HDMI are using HDMI 1. HDMI1 will be
automatically switch from build-in PC to preposed HDMI when connect external PC.
If need resource from build-in PC, to disconnect external PC.
Installation and Remove of PC module
PC in touch monitor takes modular design, easy to install, expand and maintain, also compatible with
OPS module.
PC module is on the back side of machine, while taking out the module, spin out the screws, clench the
handle and pull it out slowly.
Normally, PC module does not need taking out; if need, shut down the touch monitor and power it
down before taking it out.
Installation method of OPS is the same with normal PC, but cannot interchange with normal ones.
Connect external PC to interactive touch monitor
Connect with preposed port
1. Connect external PC to preposed HDMI port by HDMI cable
2. Connect external PC to preposed USB-Touch port by USB cable
3. After correct connection , open interactive touch monitor and PC, choose resource.
Preposed HIMI port is HDMI1 in resource list.
Connect with ports on back panel
1. connect external PC to interactive touch monitor via back port with HDMI cable;