TRACEABLE
DIGITAL
HUMIDITY
TEMPERATURE/
DEW POINT
METER
INSTRUCTIONS
®
ALL OPERATIONAL DIFFICULTIES
If this unit does not function properly for any reason,
replace batteries with new high-quality batteries (see
“Battery Replacement” section). Low battery power
can occasionally cause any number of “apparent”
operational difficulties. Replacing the batteries with
new fresh batteries will solve most difficulties.
BATTERY REPLACEMENT
Erratic readings, a faint display or no display are
all indicators that the batteries must be replaced.
To remove the battery cover, place finger in the slot
at the bottom of the cover, slide down and lift up.
Remove the exhausted batteries and replace with two
new AA alkaline batteries. Replace the battery cover
on front of unit.
WARRANTY, SERVICE, OR RECALIBRATION
For warranty, service, or recalibration, contact:
CONTROL COMPANY
12554 Old Galveston Rd. Suite B230
Webster, Texas 77598 USA
Ph. 281 482-1714 • Fax 281 482-9448
E-mail [email protected]
www.traceable.com
Control Company is ISO 9001:2008 Quality-Certified
by DNV and ISO/IEC 17025:2005 accredited as a
Calibration Laboratory by A2LA.
Control Company Cat. No. 4800
Traceable
®
is a registered trademarks of
Control Company.
©
2016
Control Company.
92-4800-00 Rev. 1 061616
