NOTE: This light meter is calibrated using
a tungsten light source. If measuring
another type of light source, the reading
displayed on the meter will have to be cor-
rected using the following factors:
Mercury - (reading x 1.05)
Fluorescent - (reading x 0.91)
Daylight - (reading x 0.95)
BATTERY REPLACEMENT
“LO BAT” appearing on the display,
indicates the battery is low and needs to
be replaced. To replace the battery, slide
the battery cover located on the back of
the unit away from the unit. Remove the
old battery and replace it with a new
9-Volt alkaline battery. Properly connect
the battery. Replace the battery cover.
Incorrectly installed batteries may dam-
age electronics.
ALL OPERATIONAL DIFFICULTIES
If this unit does not function properly for
any reason, replace the batteries with
new high-quality batteries (see “Battery
Replacement” section). Low battery power
can occasionally cause any number of
“apparent” operational difficulties. Replac
-
ing the batteries with new fresh batteries
will solve most difficulties.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
