Trace2O METALYSER DELUXE HM2000, Instruction Manual

Page: 16 / 40

16 www.trace2o.com
Metalyser
®
Deluxe HM2000 Instruction Manual
v2.0
Driver Installation
Your Metalyser
®
is compatible with most computers with a USB socket, but first
the USB drivers may need to be installed. The drivers are located on the Software
USB stick provided for all versions of Windows post Windows 95.

Insert the USB memory stick into an available USB port on your PC

Connect the USB cable supplied to the Metalyser
®
instrument as described for battery
charging. Connect the other end to an available USB port on your PC

Windows will run the ‘install new hardware wizard’

When asked if Windows can connect to Windows update to search for software.
Select ‘No, not this time’

Select ‘Install from a list or specific location’, navigate to USB memory drive

Windows should install the drivers

Once complete, the wizard will run again. Use the same settings as before

Once Windows has installed the drivers, reboot the computer and your Metalyser
®
should be installed

To verify correct installation select fast charge on the instrument and check that the
fast charge icon (see page 7) is displayed on the Metalyser
®
’s screen
Setting the Date and Time
The Metalyser
®
contains a calendar and clock which is used to date stamp the results
log. The clock may be set to GMT when you receive the instrument so may need re-
setting. It will also need re-setting if the battery is disconnected. To set the clock follow
these steps.

From the main menu select System

From the system menu select Set date/time and press <OK>

Use the navigation key to alter the date and time

Press <OK> when finished to save settings