Copyright
Trace Engineering Co., Inc.
Telephone (360) 435-8826
Part Number 3471
5916 195th Street, NE
Fax (360) 435-2229
Released: Thursday, April 29, 1999
Arlington, WA 98223 USA
PM SW 175/250 S Diagram
4-11
SW System Assembly Sequence
1.
Feet
2.
edge guards
3.
C40 (if equipped)
4.
neutral and ground bonding block (left panel for SW, right panel for DR)
5.
DCBB bonding block (left for DR, right for SW)
8.
DC175/250
9.
DC20/60/110
10. IOX60
11. any additional AC or DC breakers
12. Slider
13. Cover
14. ground conductors
15. AC output cables
16. AC neutral cables
17. DC cables
18. Decals
19. Lid
20. Door
Invert PM to install feet; revert to continue. Remove appropriate component instruction
sheets and arrange in order of installation. Gather all tools and components listed in
the instructions and place then nearby. Prepare components as instructed on the
component assembly pages and set aside. When all cables, components, falters, etc.
Are prepared and handy, assemble each component in the sequence shown, referring
to the component assembly instructions as required.
