Basic safety information
TR-Electronic GmbH 2016, All Rights Reserved
Printed in the Federal Republic of Germany
Page 14 of 40
TR - ECE - BA - GB - 0120 - 13
10/23/2019
2.6 Warranty and liability
In principle the "General Terms and Conditions" of TR-Electronic GmbH apply.
These are available to the operator with the Order Confirmation or when the contract
is concluded at the latest. Warranty and liability claims in the case of personal injury
or damage to property are excluded if they result from one or more of the following
causes:
● Non-intended use of the measuring system.
● Incorrect mounting, installation and commissioning of the measuring system.
● Work carried out incorrectly on the measuring system.
● Operation of the measuring system with technical defects.
● Unauthorized mechanical or electrical modifications to the measuring system.
● Unauthorized repairs.
● Third party interference and acts of God.
2.7 Organizational measures
● The User Manual must always be kept ready-to-hand at the place of use of the
measuring system.
● In addition to the User Manual, the generally valid legal and other binding
regulations on accident prevention and environmental protection must be
observed and communicated.
● The respective applicable national, local and system-specific provisions and
requirements must be observed and communicated.
● The operator is obliged to inform personnel about special operating features and
requirements.
● Prior to commencing work, personnel working with the measuring system must
have read and understood the chapter "Basic safety information".
● The type plate and any prohibition or instruction symbols applied on the
measuring system must always be maintained in a legible state.
● Do not undertake any mechanical or electrical modifications to the measuring
system, except for those expressly described in this User Manual.
● Repairs may only be undertaken by the manufacturer or a center or person
authorized by the manufacturer.
