![TQC SP4300 Manual Download Page 5](http://html1.mh-extra.com/html/tqc/sp4300/sp4300_manual_1146584005.webp)
5 |
2
SAFETY INSTRUCTIONS
2.1
Meaning of Symbols
The following symbols for dangers are used in this instruction manual.
Symbol Explanation
Warning
Danger
Possible immediate danger to the life or
health of personnel
If this guideline is not noted it can lead to
severe danger to health, up to fatal injury
Warning
A dangerous situation could be caused
Non observance of this guideline can lead
to injury or to damage to equipment.
Special tips and particular information
Guidelines to make optimal use of the
instrument.
2.2
Availability of Safety Information
The instruction manual should be kept at the place where the instrument operates.
In addition to the information contained in the instruction manual, general and local regulations for accident
prevention and environmental protection shall be kept available and observed.
Always ensure all guidelines in respect of safety and dangers on the instrument are in readable condition.
In case of danger the instrument has to be switched off by means of the emergency-button on the front of the
instrument. Then eliminate danger.
2.3
Training of Personnel
•
Anyone who operates the instrument should be trained properly.
•
It has to be clear who has which responsibility regarding commissioning, set-up of maintenance and
repairs, installation, and operation.
•
Anyone who hasn’t finished training should be supervised by an experienced person while working with
the instrument.
2.4
Dangers from Electrical Energy
•
Work on the electrical supply may only be done by a qualified electrician.
•
The electrical equipment of the instrument must be checked regularly. Loose connections and cable
damaged by heat must be corrected immediately.
•
IAlways make sure the instrument's power is turned off while adjusting any electrical component.
2.5
Points of Special Danger
There are some special points of danger::
Always have the adjustable test cylinder head locked in place prior to and during testing
Keep your hands away from the working area after the instrument has started!
Never put your fingers / hand in the sample holder