Modular Embedded PC platform based on Mini ITX formfactor.
This product was developed within the Intel
®
Embedded Building Blocks Initiative.
Standard kits:
COMKits with Heatspreader for direct thermal connection
with Intel CPUs:
From Intel Atom N270 up to Intel Core 3
rd
Generation (“Ivy Bridge”)
up to Low Power versions of Celeron / Core-i3 / Core-i7 with 17 W TDP
with AMD CPUs:
AMD Fusion APU (G-series) up to 1.6 GHz dual core T56N
COMKits with active cooling solution
with Intel CPUs:
Intel Core 2
nd
Generation (“Sandy Bridge”) & Intel Core 3
rd
Generation (“Ivy Bridge”)
Low Power versions of Celeron / Core-i3 / Core-i7 with 17 W / 25 W TDP
and also versions of Celeron / Core-i3 / Core-i5 / Core-i7 with up to 45 W TDP
supporting single, dual and quad core CPUs
with AMD CPUs:
AMD Fusion APU (G-series) up to 1.6 GHz dual core T56N
Mechanical integration:
For Mini ITX standard chassis: Use standard mounting positions with additional 22 mm standoffs. IO-shields are
available as optional accessory from TQ.
For Embedded chassis (only for COMKits with Heatspreader): Mount the system to the top cover of the chassis with
direct thermal connection between the COMKit thermal solution and the chassis.
For extending the functionality with a standard PCI or PCIe x1 card use the
RISER-COME-PCI or RISER-COME-PCIe (optional accessory).
Power supply:
Use any ATX power supply which can handle the power specification of the kit.
3.3 V (+/-5%) (< 0,5 A for the baseboard itself)
5 V (+/-5%) (< 0,5 A for the baseboard itself)
12 V (+/-5%) with 0,7 .. 7 A (main supply for the CPU module, power is depending on the CPU type)
5 V Standby (+/-5%) (typical < 0,5 W)
For optimized mechanical implementation you may use picoPSU miniature ATX power supplies.
Power on/off & BIOS Settings:
To switch on/off the system use the power button of the baseboard or any power button connected to the system
connector. For 'Auto Power on‘ use BIOS setting 'After Power Fail‘ = 'Power on‘ / 'Power Loss control‘ = ‚Always on‘
DVI-
I: To enable the digital output on the DVI connector, use BIOS setting 'Digital Display Port B‘ = 'SDVO‘
If the COM interface on HMI / Display Control connector is not used, please disable COM2 in the BIOS settings.
For additional information, technical documents, drivers and accessories visit www.tq-group.com/COMSys
COM
S
y
s.CO
M
K
it
-Qu
ick
S
ta
rt
Gu
ide
.0
1
0
The information contained in this document is subject to change without notice.
HW: MB-COME-1L Rev. 2xx
Example
Example
RISER
add-on card
below baseboard
Overview COMSys product portfolio:
COMKit
Baseboard
MB-COME-1L
COMBox-STD
COMBox-EMB
COMPanel
