CALIBRATION
When to calibrate
Calibration may be required when it is initially installed, if the scale/balance is
moved to a substantial distance.
This is necessary because the weight of a mass in one location is not necessarily the
same in another location. Also, with time and use, mechanical deviations may
occur.
How to calibrate
1.
Before entering calibration mode, press
[ON/OFF]
to turn the power on for
1minutes.
2.
Enter calibration mode
Press
[ON/OFF]
to turn the power off. Press
[UNITS]
first, then Press
[ON/OFF]
,
while keeping pressing
[UNITS]
, the display will show CAL then the A/D value.
3.
Calibration by the weight
Wait for the stable indicator to be displayed, Press
[UNITS]
the display will show
flashed calibration weight.
4.
Place the calibration weight on platform. After the stable indicator is displayed,
then press
[UNITS]
, the display will show "-------" then the A/D value. Now
calibration is finished.
5.
Press
[ON/OFF]
, turn off the power, press
[ON/OFF]
to turn on the power again,
place the weight repeat steps 2-5.
6.
Return to weighing mode
Press
[ON/OFF]
to turn the power off. Press
[ON/OFF]
again to turn on the power
and the scale/balance return to the weighing mode.
FEATURES
z
Auto shut off (selectable).
●
Auto calibration
z
Auto zero tracking
●
Auto backlight (selectable)
z
Low battery indication
●
g/oz
……
conversion
z
Large LCD (6digits 15 mm high)
●
1/30000&1/15000 division available
5
PARTS DESCRIPTION
LEFT SIDE
AC adaptor
Socket
TOP
Weighing platform
The arch face of platform is front.
Correct the direction of the pan.
Protector
Remove it before use
Display
ON/OFF
key
Turns the scale/balance
Power on/off.
UNITS
key
Changes weighing units
ZERO
key
Sets display to zero or
Subtracts weight of a container.
BOTTOM
Battery compartment
Battery compartment cover
Batteries
Batteries are not included
DISPLAY
ZERO
indicator
Indicates when the reading is “0” Weighing unit
STABLE
indicator
Indicates when the reading is stable.
Low battery indicator
2
