BLUE M
Model ESP400 Industrial Oven
Page 16
Making the Power Supply Connection to the Chamber:
A main power disconnect is not provided with your chamber. We recommend that a fused disconnect switch
on a separate branch circuit be installed as the power source to your chamber, in accordance with all
national and local electrical codes. Reference the Electrical Schematic for all electrical requirements.
A power supply junction box is installed at the rear of the unit with ¾” knockouts. Connect your power supply
cables to the labeled terminal blocks. As an option, a power cord and plug may be supplied with your unit.
Warning!
High Accessible Current – An Earth connection is essential before connecting the power
supply. Make sure equipment is properly grounded in accordance with all codes.
5.6
Application of Power
Before energizing any equipment, make a visual inspection for loose components, electrical connections,
fittings, etc. Shut all operating switches to the “OFF” position before energizing.
Have trained personnel start and check out the equipment before its first cycle.
120 VOLT AC TERMINAL BLOCKS
208 / 240 VAC TERMINAL BLOCKS
Black / White
Power Leads
Black / Black
Power Leads
